Aller au contenu principal

Build your own cash and cashless register box.

We will realease all steps to go from this : coucou

To this :

7inch_final.png

Here it's for 7inch screen.
We will see the differents step betwen 7inch screen an 10inch

To do this, follow these steps :
1 - BOM ( Bill Of Material) 2 - Lazer cut the body
3 - 3D-print accessories
4 - body assembly 7inch
5 - body assembly 10inch

1- We will start with the BOM :

  • 1 X Access to FABLAB with :
    • 3D printer
    • Lazer cut able to cut 5 milimeters plywood
  • 1 X raspeberry PI3B +
  • 1 X Power supply for Raspberry
  • 1 X micro SD cards (8Go mini)
  • 7 X " Dupont " cables
  • 1 X NFC card reader ( RC522 )
  • 1 X USB capacitive touch screen : Waveshare 7inch HDMI LCD ( C ) (or 10.1inch HDMI LCD(G) )
  • 1 X Plywood 5 mm ( qty depend if 7 or 10.1 inch)
  • 1 X box of 2X10 universal screw
  • 1 X box of Roofing bolt & nut 5X16
  • 1 X precision screwdriver

For the 10’’ screen an additional USB-MicroUSB cable (guaranteeing power supply from raspberry).
Optionnal :

  • 1 x Adaptateur RJ45
  • 1 X small RJ45 Cable
  • 1 X Adaptateur Micro USB
  • 1 X keybord(if you have problem with SSH connection to the Raspberry)
  • 1 X soldering iron kit ( if you by NFC card kit )